Posts Tagged ‘ssd’

Why Western Digital is not Answering on Failed SSD Drives

Western Digital is not answering questions about their failed SSD drives because they don’t know exactly where the problem lies. The three main components for any SSD drive will be the PCB board, the on-board chipset that controls the flow of information between the host PC and the memory and of course, the NAND memory itself. If we break this down a bit more, we might find out what the reason is.

Background (PCB, USB Controller, NAND Memory)

The PCB board

Printed Circuit Boards, or PCBs, play a vital role in modern electronics. They are like the backbone of electronic devices, providing a platform for components to be connected, organized, and powered. Let’s break down their value, design process, testing, and impact on soldered components.

Value of PCBs:
A PCB serves as a foundation for electronic components to work together. It’s like a puzzle board with electrical pathways etched onto it, allowing components like resistors, capacitors, microchips, and more to communicate and function properly. Without PCBs, it would be incredibly difficult and messy to manually connect all these components together.

Designing PCBs:
The process of designing a PCB involves several steps:

Schematic Design:
Engineers create a schematic diagram, which is like a blueprint showing how components are connected. This helps plan the layout of the PCB.

PCB Layout:
Using specialized software, the engineer arranges components on the PCB, considering factors like size, heat dissipation, and signal integrity. This layout involves placing components and drawing the electrical pathways (traces) that connect them.

Routing:
This step involves deciding the exact paths for the traces to minimize interference and ensure efficient operation. High-speed components may require careful consideration to maintain signal quality.

Layers:
PCBs often have multiple layers, allowing for more complex designs. Each layer can carry different traces, making the most of the available space.

Components:
Once the layout is finalized, components are attached to the PCB using soldering techniques. Surface Mount Technology (SMT) and Through-Hole Technology (THT) are commonly used methods.

Testing PCBs:
Testing ensures that the PCB functions as intended and helps catch any errors before mass production. There are a few ways to test PCBs:

Visual Inspection:
Engineers visually check for any obvious issues such as soldering defects or incorrect component placement.

Continuity Testing:
This involves checking if the expected electrical connections exist between components and traces. Multimeters can help with this.

Functional Testing:
PCBs are powered up, and their performance is checked to ensure that all components are working as expected. This can involve running specific test programs or performing specific tasks to evaluate functionality.

Impact on Soldered Components:
Components soldered to a PCB are connected to it through solder joints. These joints are vital for the proper functioning of the device. The quality of soldering affects the overall reliability and performance of the PCB. Poor soldering can lead to bad connections, signal interruptions, and even complete device failure.

PCBs are crucial for modern electronics as they provide a structured platform for components to work together. Their design involves careful planning, layout, and routing of components and traces. Testing ensures proper functionality, and the quality of soldered components directly impacts the overall reliability and performance of the PCB and the device it’s a part of.

USB Controller

Let’s dive into USB controllers and their role in solid-state hard drives (SSDs) and flash drives.

Continue Reading

Solid State Drives Slurp Power Not Save It

As Gizmodo says, “swindled“  That’s what we are all feeling when Tom’s Hardware determined solid state drives don’t save power, they slurp it up like a 64oz soda from 7-11.

solid state drive power

The theory behind SSD (Solid State Drives) would be no moving parts, thus a big power savings.  This thought process seemed particularely promessing for portable laptops.  However, it seems the “moving parts” cousin – our traditional disk drives – do a better job at power management. Tom’s Hardware is drawing some conclusions from their experiment.  Since SSD has an “On or Off” mode this means when your laptop is on, that Solid State Drive is always drawing power; whereas, the old fashion disk drive only draws power when it’s searching for data and thus doesn’t always draw a certain level of power…in fact, these drives are optomized to only pull power at peak search times. Not sure how much water this theory holds, as the disk drives always need power just to know when a request is being made, but hey, Tom’s Hardware has more resources [for both testing and experience] so I’ll take their word at face value for the moment. Continue Reading

Copyright ©

Copyright © 2011-2019 by
USB Powered Gadgets and more…
All rights reserved.

SD Card Duplicator Equipment

GetFlashMemory.info has reviewed SD Card Duplicators by Nexcopy.  Our results found the product to be reliable, fast and accurate.

They manufacture both PC connected and standalone systems to fit any type application

Custom Shape USB Media

Turn your product into a custom USB shape. Right down to the last detail. Click to see over 30 examples of custom shape USB drives.