Posts Tagged ‘not changing’

USB Flash Drive Name Not Changing – 3 Possible Reasons Why

With my Windows 10 computer whenever a USB flash drive is connected the Windows Explorer / My Computer displays the wrong drive label for my device. The name is correct in Disk Management, but Explorer is incorrect, as well any program which uses Explorer to parse the device and read the volume name.

I’ve also seen where any USB device connected displays a specific label name, but not the correct label name as seen in Disk Management.

When the above situation occurs there are three possible reasons why the USB drive name displays the incorrect label. Starting with the most common and easiest to fix, let us take a look at the three solutions to resolve this problem:

Reason #1

Check the device connected for an .inf file. An .info file is a Setup Information file and tells the host computer what to do [Wikipedia]. Many times this is a hidden file, so you may need to turn on “Show hidden files, folders and drives.” If you don’t know how to do this, jump to the bottom of this article and GetUSB.info shows you how.

In the screen shot below you can see the drive letter D, which is a flash drive, having a very long label (or Volume) name of “How To Make a CD ROM Partition” The image also shows the autorun.inf file open with the instructions to rename the drive label to be “How To Make a CD ROM Partition”

To resolve the problem of the label name being different than what you expect, or see is Disk Management, you will need to delete this file. Once the file is deleted you must power cycle, or reconnect, the USB drive to see the changed affects.

If you want to learn more about using inf files with USB drives, we did a post on this many moons ago, back in April of 2009. Here is the link on how to use inf files to rename your flash drive.

Reason #2

The second most common reason would be a rogue registry entry that is somehow sticking around. The registry of a computer system is like a huge log file, or registry, of things changed on your PC, connected to your PC, software installed on your PC and drives on your PC. It is very likely the Windows operating system has, some how, locked in the volume name to the drive letter… so whether one USB device or another is connected, the registry pitches out the locked volume name. A quick way to resolve this issue is clean out the rogue registry entries.

GetUSB.info wrote a blog post about this a long time ago, but in summary, a Windows registry will make over 200 entries or edits for each USB stick connected. That is a lot of information! Once the drive is disconnected, the registry information is still there. These “historical” entries are what must be cleaned out. It’s a good article if you have a few extra minutes [found here].

Continue Reading

Copyright ©

Copyright © 2011-2019 by
USB Powered Gadgets and more…
All rights reserved.

SD Card Duplicator Equipment

GetFlashMemory.info has reviewed SD Card Duplicators by Nexcopy.  Our results found the product to be reliable, fast and accurate.

They manufacture both PC connected and standalone systems to fit any type application

Custom Shape USB Media

Turn your product into a custom USB shape. Right down to the last detail. Click to see over 30 examples of custom shape USB drives.