You never know where a flash drive has been.
It’s always best to scan a USB flash drive.
Did you know Windows Defender can be setup to scan a USB stick automatically, when it’s plugged in? Below are the steps to make that configuration setup.
By default, Windows 10 does not have this setting configured. We are not sure why, as USB sticks and downloads from internet sites are probably the two most vunerable ways to get a computer infected. Our only guess, is the scan process of a USB stick can take some time, and for a user to have that step done with each connection, could reduce the user experience.
This tutorial will take about three minutes to setup. I would suggest read the rest of this article and when done, go back and perform the few steps required to make the Windows Defender scan for USB flash drives.
We are going to make a Group Policy to scan USB flash drives using Windows Defender.
Let us run the Group Policy editor.
Press the Windows Key + R
Type gpedit.msc and press Enter or OK.
Look for the Administrative Templates under the top Computer Configuration directory, expand this directory (folder)
Scroll down to Windows Components, expand it
In that directory scroll down more and look for Windows Defender Antivirus, expand it
Billy Idol’s Hot In The City is a tune which comes to mind whenever talking about USB gadgets that cool thyself.
With summer coming into full swing, this is a good time for a USB fan mention. Cruising the Amazon website this Aikoper product popped up. At first glance I honestly thought the fan was designed by Apple Computers. The aluminum base, slick black body and the cool grey vents, thought it was from Apple for sure. Wrong!
This USB fan has some unique features we believe everyone will like.
There is no switch for turning the fan on or off. Rather you touch the aluminum base. That is very Apple’esc. A single tap to the base and the USB fan goes into “low speed” mode. A double tap will put the USB fan into “high speed” mode. The third tap will turn the fan off. The touch sensitive base has four rubber pads to insure no vibration during operation.
The fan itself is a dual-blade design. Meaning there are four blades toward the front of the bionic shaped shell and another four blades near the rear of the black shell. The idea here is reducing the device noise while in operation.
The black shell case is convex in design to pull air down and into the system, rather than up and into the system. Although the pitch of the shell isn’t great, we may assume less dust and dirt will come into the system from a pull-down air flow design. The curved shell sits on a the aluminum base with some pitch mobility to angle the fan a bit higher or lower for optimal position while in use.
The product dimensions are 5.6 x 3.9 x 4.9 (inches) and sells for $16.99 USD from the Amazon website (at the time of this post).
The Amazon listing has over 1,609 ratings with 61% as a five star product, 13% as four star product and the balance just picky people trying to be overly critical. To give you an idea of product feedback and experience, here are some testimonials from the Amazon listing: